[TX Filter]Select to restrict sending data from the machine to a computer by specifying MAC addresses.[RX Filter]Select to restrict receiving data from the machine to a computer by specifying MAC addresses.5 Specify the settings for packet filtering.● Select the precondition (default policy) to allow or reject the communication of other devices with themachine, and then specify MAC addresses for exceptions.1 Select the [Use Filter] check box and click the [Allow] or [Reject] radio button for the [Default Policy].[Use Filter]Select the check box to restrict communication. Clear the check box to disable the restriction.[Default Policy]Select the precondition to allow or reject other devices to communicate with the machine.[Allow]Select to block communication packets when they are sent to or received fromdevices whose MAC addresses are entered in [Exception Addresses].Communications with other devices are permitted.[Reject]Select to pass communication packets only when they are sent to or received fromdevices whose MAC addresses are entered in [Exception Addresses].Communications with other devices are prohibited.2 Specify address exceptions.● Enter the MAC address in the [Register Address] text box and click [Add].Security265
