● You cannot use spaces.● A workgroup name set in [Workgroup Name] under [SMB Settings] is automatically used for [SMBWorkgroup Name], if any. A change to the workgroup name in [SMB Workgroup Name] is also applied to[Workgroup Name] under [SMB Settings].6 Perform a hard reset.● Click [Device Control], select [Hard Reset], and then click [Execute].➠ The settings are enabled after the hard reset is performed.Selecting settings from the operation panel● You can also enable or disable the WINS settings from the setting menu of the operation panel. WINSResolution(P. 373)LINKSConfiguring SMB(P. 235)Network221
