Canon LBP312 SERIES User Manual

Also see for LBP312 SERIES: Getting started

Contents

Canon LBP312 SERIES User Manual Manual pdf 191 page image

● You can use only one of the protocols DHCP, BOOTP, and RARP. If the selected protocol is set to ,the other two protocols are automatically set to .4 Select , and press .5 Press .6 Select , and press .7 Select , and press .When using DHCPIf you turn OFF the power and ON again, an IP address differing from the current one will be assigned. Thismay disable printing. To use DHCP, specify one of the following settings after consulting the networkadministrator.● Configuring the DNS Dynamic Update Function Configuring DNS(P. 213)● Specifying Settings for the DHCP Server to Constantly Assign the Same IP AddressIf you do not want to use DHCP/BOOTP/RARP to assign an IP address● Set all the protocols to . If you set , , or to when theDHCP/BOOTP/RARP servers are unavailable, the machine will waste time and communication resources insearching the network for available services.IP addresses that are given precedence● IP addresses assigned via DHCP/BOOTP/RARP override the address obtained via Auto IP.Manually entering an IP address1 Select , and press .2 Select , and press .Network185