poorly ventilated rooms. To maintain a comfortable working environment, it is recommended that the roomwhere the machine operates be appropriately ventilated. Also avoid locations where people would beexposed to emissions from the machine.Do not install in the following locations that may result in damage● A location subject to dramatic changes in temperature orhumidity● A location near equipment that generates magnetic orelectromagnetic waves● A laboratory or location where chemical reactions occur● A location exposed to corrosive or toxic gases● A location that may warp from the weight of the machine orwhere the machine is liable to sink (a carpet, etc.)Do not install in a location where condensation occurs● Water droplets (condensation) may form inside the machine when the room where the machine is installedis heated rapidly, and when the machine is moved from a cool or dry location to a hot or humid location.Using the machine under these conditions may result in paper jams, poor print quality, or damage to themachine. Let the machine adjust to the ambient temperature and humidity for at least 2 hours before use.In altitudes of above sea level 3,000 m or higher● Machines with a hard disk may not operate properly when used at high altitudes of about 3,000 metersabove sea level, or higher.Other precautions● When the machine is turned ON for the first time after purchased, it may make some noise initially, butplease note that this is not a fault.Important Safety Instructions4
