Canon ImageRUNNER 2422L User Manual

Contents

Canon ImageRUNNER 2422L User Manual Manual pdf 93 page image

Replacing the Toner3-10Routine Maintenance3Replacing the TonerWhen there is only a small amount of toner remaining in the machine, the followingmessage blinks on the LCD display. You may continue printing, however, it is highlyrecommended that you prepare a new toner cartridge before the toner hascompletely run out.When prints can no longer be made as toner runs out completely, the followingdisplay appears on the LCD display. Follow the procedure described below to helpyou replace the toner cartridge.NOTEFor detailed information on the displays showing the instructions on replacing the toneror staples, clearing the paper or staple jams, see Chapter 7, “Troubleshooting,” in theReference Guide.WARNING• Do not burn or throw used toner cartridges into open flames, as this may causethe toner remaining inside the cartridges to ignite, resulting in burns or a fire.• Do not store toner cartridges or paper in places exposed to open flames, as thismay cause the toner or paper to ignite, resulting in burns or a fire.Density: AutoImgQual.: Text2-Sided: OffPrepare new tonerToner lowWhen is shownpress [ ] todisplay stepsOut of toner