|
Basic Copying2-12Basic Operations2Basic CopyingThis section describes the flow of basic copy operations.NOTE• For instructions on turning ON the machine, see “Main Power and Control Panel Power,”on p. 1-15.• For instructions on routine maintenance, see Chapter 6, “Routine Maintenance,” in theReference Guide.• The output quality may deteriorate if the platen glass is dirty. Always keep the platenglass clean.• Do not touch the optional feeder or platen cover while copying. Rocking the feeder orplaten cover may distort the image being copied.1 Press the appropriate keys in accordance with the messagesdisplayed on the LCD display.If there are no messages displayed, proceed to step 2.● If the message appears:NOTEFor instructions on using Department ID Management, see Chapter 4, “SystemManager Settings,” in the Reference Guide.❑ Enter your Department ID (up to sevendigits) using - (numeric keys).❑ Use [ ] or [ ] to select ➞enter the password (up to seven digits)using - (numeric keys).❑ Press (ID).ID Key after InputWhen done press ID keyDept. ID:0000001Password:Dept. ID/Pass InputDept. ID/Pass InputPassword:*******ID Key after InputWhen done press ID keyDept. ID:0000001
|
