Component Function4 USB port Use the USB port to:• Connect the spectrophotometer and calibrate theprinter and controller.• Print a file from an USB drive• Scan to a USB drive5 [Schedule] button Access the [Schedule] view to manage the jobs inthe schedule.6 [Jobs] button Access all functions to print, copy and scan yourdocuments.• Manage or change the settings for jobs in the[Waiting jobs], [Scheduled jobs] and [Printedjobs] lists, or in a [DocBox] (optional).• Carry out copy jobs and scan jobs.7 [Trays] button Access the [Trays] view on the operator panel to dothe following, for example:• Check the content of all paper trays.• Load a new media type into a paper tray, or• Change the media type which is available in oneof the paper trays.8 [System] button Access [System] view to do the following, for exam-ple:• Check the status of the toner, staples and othersupplies.• Read the counters.• Start maintenance.• Set up the preferred workflows.• Change a number of default system settings.• Adjust the brightness and contrast of the LCDpanel.• View the content of the Media catalog or addtemporary media to the Media catalog.• Start maintenance, calibration and media regis-tration• Shut down the printer.9 Dashboard The dashboard displays information about the sys-tem status such as:• Information about the current printing process.• Information about operator intervention that isrequired soon.• Information about errors.• Information about the status of the toner reser-voir and staple cartridges.• Continue the job when the status is [On hold]. 4The operator panelChapter 2 - Main parts 29
