97PrintingEPrintingPrinting Still ImagesConnecting the Printer to the Camcorder1. Turn off the camcorder and insert a memory card that contains stillimages.2. Turn on the printer.3. Set the camcorder to mode.4. Connect the camcorder to the printer using the USB cable.• “ ” appears and changes to “ ”. Does not appear with movies, or still imagesthat cannot be played back with the camcorder.• The (print/share) button lights up and the current print setting will be displayedfor approx. 6 seconds.If “ ” continues to flash (for more than 1 minute) or if “ ” does not appear, thecamcorder is not correctly connected to the printer. In such case, disconnect thecable from camcorder and printer, turn off camcorder and printer, turn both backon and reconnect the camcorder to the printer. “ ” will appear for images that cannot be printed. We recommend powering the camcorder from a household power source. Refer also to the instruction manual of the printer.The camcorder can be connected to any PictBridge compatibleprinter. You can use the print order settings for direct printing ofstill images recorded on the memory card ( 102).Canon printers: SELPHY CP, SELPHY DS and PIXMA printers.PictBridgecompatible printerOpen the LCD panelUSB Cable (supplied)
