90DV DubbingYou can input video from other digital video devices via the DV terminal, and record theinput video on the tape in the camcorder. You can also record the input video as a movieor still image on a memory card.ConnectingCheck the type and orientation of the DV terminal and make sure you connect the DVcable properly. Refer also to the instruction manual of the connected device.DubbingAvailable only in the mode.1. Load a blank cassette in this camcorder.If “AV DV” is displayed, change the setting ( 93).2. Connected device: Load the recorded cassette or disc.3. Open the FUNC. menu, select ( ) the record pause icon andpress ( ).4. Select ( ) [EXECUTE] and press ( ) to start the search.5. Connected Device: Play back the tape or disc.In record pause mode and during recording, you can check the picture on the screen.6. If the joystick guide does not appear onscreen, press ( ) to display it.7. Push the joystick ( ) towards / when thescene you wish to record appears.• Recording starts.• Push the joystick ( ) towards / again to pause/resume the recording.8. Push the joystick ( ) towards to stop recording.9. Connected Device: Stop playback.Recording the Input Video on a Memory CardThe size of the still image recorded on the memory card will be S 640 x 480. The stillimage quality and the movie size can be selected.Available only in the mode.Signal flowCommercially available DV cableDigital video device(e.g. camcorder)OutputOpen the LCD panel
