4 99CustomizationAssignable ButtonsThe camcorder conveniently features 15* buttons to which you can assign various functions. By assigning often-used functions, you can quickly access them with a single press of a button. Some assignable buttons arelocated on the monitor unit or grip unit, so their availability depends on the camcorder configuration used.* In mode, only assignable buttons 1 to 9 are available.Changing the Assigned Function1 Open the [Assign Button] submenu.[w Other Functions] > [Assign Button]2 Select the button to change and then press SET.• A list of available functions appears.• The quick reference shows the default settings for each assignablebutton. By default, buttons 10 to 15 have no assignable function set.3 Select the desired function and then press SET.• If you selected [User Setting (NONE)], the menu will change fromorange to blue to indicate you are selecting a menu setting to register.Continue the procedure to register a menu setting. Otherwise, you donot need to perform the rest of the procedure.4 Navigate the menus to find the menu setting you want to registerand then press SET.• The selected menu setting will be registered to the customizable slot and to the assignable button.• The name of the selected menu setting will be listed instead of [User Setting (NONE)] and the customizableslot will be marked by a .NOTES• You can check the two [Assign Button] status screens (A 157) to see what functions are set for theassignable buttons.• You can reset only the functions assigned to the assignable buttons, without affecting other camera settings,with the [w Other Functions] >[Reset] > [Assignable Buttons] function. All the assignable buttons will returnto their default function.Operating modes:On the monitor unit:On the grip unit:[w Other Functions][Assign Button][1 Magnification][2 Peaking][3 Zebra][4 WFM (LCD)][5 Headphone +][6 Headphone -][7 Magnification][8 WFM (LCD)][9 Edge Monitor][10-15 (NONE)]COPY
