Custom Picture Settings1023 Change the setting to the desired level and then press SET.• Refer to the tableAvailable Custom Picture Settings (A 104) for details on the various settings.• Repeat steps 2 and 3 for other settings, as necessary.4 Press the CUSTOM PICTURE button to exit the custom picture menu and apply the new custompicture settings.Resetting the current file’s settings to default values1 Select [Reset] and then press SET.2 Select the default values and then press SET.• Select [NEUTRAL] to reset to neutral default values (equivalent to not using custom picture settings at all) or[CINEMA] or [EOS Std.] if you want to replicate these preset settings, for example as a starting point to editthem further.3 Select [OK] and then press SET.Renaming Custom Picture Files1 After selecting a file, open the [Rename] submenu.[, / Edit File] > [Rename]• A screen appears that displays the current file name with an orangeselection frame on the first character.2 Select an alphanumeric character or symbol then move (Ð) to the next field.• Change the rest of the name in the same way.3 Select [Set] and then press SET.4 Press the CUSTOM PICTURE button to exit the custom picture menu and apply the selected custompicture settings.Protecting Custom Picture FilesProtecting a custom picture file prevents its settings from beingaccidentally changed.1 After selecting a file, open the [Protect] submenu.[, / Edit File] > [Protect]2 Select [Protect] and then press SET.• In the custom picture menu, i will appear next to the file name.• To remove protection settings, select [Unprotect] instead.3 Press the CUSTOM PICTURE button to exit the custom picture menu and apply the selected custompicture settings.Transferring Custom Picture FilesYou can transfer custom picture files between the camcorder and SD card. When the custom picture file is in thecamcorder, use [Copy To *] or [Load From *] depending on the operation you wish to perform. Similarly,when the custom picture file is on an SD card, use [Copy To Cam.] or [Load From Cam].[, / Edit File][Rename][, / Edit File][Protect]COPY
