Clip Operations122NOTES• You cannot copy a clip if either CF card slot cover is open.• If a clip is being copied to a card that already has a clip with the same number (the last 4 digits in the clipname), then the copied clip will be renamed with the following number.Deleting ClipsYou can delete any clip except those with an $ mark. To delete such clips, delete the $ mark beforehand.Deleting a Single Clip1 Select the desired clip and then press SET to open the clip menu.2 Select [Delete Clip] and then press SET.• The clip information screen appears and it prompts you to confirm the operation.3 Select [OK] and then press SET.• Select [Cancel] instead to cancel the operation.• While the clip is being deleted, the operation cannot be canceled.4 When the confirmation message appears, press SET.Deleting All Clips1 Open the [Delete All Clips] submenu.[w Other Functions] > [Clips] > [Delete All Clips]2 Select [OK] and then press SET.• All of the clips (except for clips with an $ mark) on the selected CFcard will be deleted.• Select [Cancel] instead to cancel the operation.• While the clips are being deleted, you can press SET to cancel.3 When the confirmation message appears, press SET.Deleting the User Memo and GPS Information1 Select the desired clip and then press SET to open the clip menu.2 Select [Delete User Memo] and then press SET.• The [Delete User Memo] screen appears and it prompts you to confirm the operation.3 Select [OK] and then press SET.• The user memo and GPS information is deleted and the screen changes back to the clip index screen.• Select [Cancel] instead to cancel the operation.Copying a Custom Picture File Embedded in a ClipYou can copy the custom picture file embedded in a clip to the camcorder.1 Select the desired clip (a clip with the / icon) and then press SET to open the clip menu.2 Select [Copy / File] and then press SET.[w Other Functions][Clips][Delete All Clips]COPY
