COPYRIGHT © 1999 CANON INC. CANON ADF FOR iR600 REV.0 JAN. 1999 PRINTED IN JAPAN (IMPRIME AU JAPON) 3-1CHAPTER 3 MECHANICAL SYSTEMFigure 3-101Figure 3-102[6][2][1][5][4] [3][1]Figure 3-103Lift.I . BASICCONSTRUCTIONA. External Covers[1] Lower front cover[2] Front cover[3] Main cover[4] Original tray[5] Upper cover[6] ADF controller coverRemove the covers as follows when clean-ing, inspecting, or repairing the inside of themachine.1. Removing the Machine1) Turn off the copier.2) Disconnect the communication cable [1] ofthe machine from the copier.3) Open the machine fully.4) Go to the rear of the copier, and lift themachine to remove.Reference:The hinge support is equipped with alocking mechanism to prevent displace-ment, requiring you to fully open it whenremoving it from the copier.
