5 Printer Maintenance837 Click the Send button.A message dialog box appears and asks you to confirm that you want to send thesettings.8 Click the Yes button.The position of the printhead is adjusted.9 Click the Print button again to print the patterns and confirm that the printhead isadjusted correctly.Look at the printouts. If each color line of the patterns is aligned with 0, the adjustmentis finished. If the patterns are broken or separated, repeat Steps 5 to 9 to correct theadjustment.10 Click the Close button.A confirmation message appears.11 Click the Yes button.● Even if you open the Printhead Position Adjustment dialog box, you cannot adjustthe printhead correctly unless you print the Printhead Position Adjustment Patterns.● The settings are adjusted –16 to +16 in the vertical range and –12 to +12 in thehorizontal range. Depending on the status of the current settings you may not beable to select some settings in the range. Set it in the range between the arrows, displayed on the slider scale.● The position of black ink printhead nozzle is a benchmark for adjusting A to J, so itcannot be adjusted. Usually 0 (a reference value) is displayed and you cannot enterany value.Note
