42 Canon BJC-8500 User’s ManualInstalling the paper output receiverThe paper output receiver is installed above the paper cassette on the frontof the printer. The paper output receiver receives each printed sheet as it isejected from the printer and holds it for a few seconds before the movableflaps gently let it down on top of the stack. This avoids staining betweenstacked sheets by allowing the sheet below to dry for a few seconds beforethe next sheet is stacked on top of it.During a long print job, do not allow the printed sheets to stack high-er than 15 mm (about 1/2 inch), approximately 50 sheets of PlainPaper or 40 sheets of High Resolution Paper HR-101.1 While holding the paper output receiver at a slight angle, insert it intothe slot ¬ above the paper cassette and lower it gently as you slideit into the printer.FlapsReceiver paper guide¬
