Installing the BJ CartridgesThis section describes how to install the BJ Cartridges in the printer. The BJCartridges must be installed in the printer before you install the ink tanks.Two BJ Cartridges must always be installed in the cartridge holder.This printer employs two BJ Cartridges: the Black BJ Cartridge BC-80 andthe Color BJ Cartridge BC-81. An additional BJ Cartridge, the Color BJCartridge BC-82 Photo, is also available to replace the Black BJ CartridgeBC-80 for special print jobs.Always follow these important guidelines regarding BJ Cartridges:n Never attempt to install a BJ Cartridge of another manufacturer.n Each BJ Cartridge is equipped with slots to hold specially designed inktanks. You must always use the correct ink tanks for the BJ Cartridges.n The Color BJ Cartridge BC-82 Photo holds three ink tanks (Cyan, Black,Magenta). This cartridge is designed to deliver photo-realistic prints ofphotographic images on High Resolution Paper HR-101. For details aboutthe driver settings for this special BJ Cartridge, refer to Windows PrintGuide or the Macintosh Print Guide.n BJ Cartridges are delicate and the ink tanks contain wet ink, so alwayshandle them carefully.n Do not unwrap a BJ Cartridge until you are ready to install it.n Install a BJ Cartridge in the cartridge holder as soon as you unwrap it andremove the protective cap.Setting up and using the printer 27Setting up andusing the printerBlack BJ CartridgeBC-80Color BJ CartridgeBC-81Color BJ CartridgeBC-82 Photo
