48Paper HandlingPrinting on Special Media Types Back Print FilmThis is semi-transparent film used for backlit display. Printed images are reversed(mirrored).• Do not use the BC-22e Photo BJ Cartridge when printing back print films.• Load back print film with the printing side (the rougher side) facing up.• You can load up to 10 sheets at one time in the sheet feeder.• Select Back Print Film as the Media Type setting in the printer driver.Selecting the BJ Cartridge and Media TypeChanging the Print Dialog Box Settings• After printing, remove each sheet from the output tray as it is ejected.• Allow about 15 minutes for the ink to dry.To avoid smudging and prevent printed sheets of back print film fromsticking together, place a sheet of uncoated plain paper between eachsheet of back print film. When storing a single sheet of back print film in aplastic folder, place sheets of plain paper on both sides of the film.Print Side(Rough Side)WindowsMacintoshNote
