Canon 3433B010 Basic Manual

Also see for imagePROGRAF iPF750 MFP M40: Install guide Basic guide Brochure Basic guide User guide

Contents

Canon 3433B010 Basic Manual Manual pdf 43 page image

43Error MessagesThe paper is too small.The paper is too small.Error Message Cause Corrective ActionThe paper is too small. The loaded paper is too small. Replace the paper with paper of A4/Letter (vertical)size or larger as follows.Press ▲ or ▼ to select Change Paper, press theOK button, and remove the paper.(→ , Removing Sheets)(→"Loading and Printing on Sheets," User Manual)2.1.Switch to paper A4/Letter (vertical) or larger.The printer will resume printing.Press ▲ or ▼ to select Stop Printing, and then pressthe OK button.Replace roll with 10 in. wide orlarger roll.The loaded paper is too small. Replace the roll with a roll 10 inches in width or largeras follows.Press ▲ or ▼ to select Change Paper, and thenpress the OK button.(→ , Removing the Roll from the Printer)(→ , Attaching the Roll Holder to Rolls)2.1.Replace the roll with a roll 10 inches wide or larger.The printer will resume printing.Press ▲ or ▼ to select Stop Printing, and then pressthe OK button.Replace paper with A4/LTR(vertical) or larger(→"Removing the Roll Holder from Rolls," UserManual)(→ , Loading Rolls in the Printer)Remove paper and check pap.sizeA sheet has come out of the printerduring printing.Press the Release Lever back and remove thepaper.1.Reload the sheet, aligning it with the guide on theright.2.Pull the Release Lever forward.3.If Not finished printing. Finish printingremaining jobs? is displayed, press the OK button.4.Printing will resume, starting from the page onwhich the error occurred.(→ , Loading Sheets in the Printer)