3TroubleshootingPrinting Does Not StartPhenomenonThe Data Lamp on the controlpanel does not light upThe printer does not respond evenif print jobs are sent1.2.1.2.Ink Filling.. is displayedMake sure the power cord is securely plugged in, allthe way. Press the Power button to turn on the printer.Set Pause Print to Off.In Windows, select the printer by clicking SelectPrinter or Printer in the printing dialog box and tryprinting again.In Windows, restart the print job as follows.In Mac OS X, select the printer by clicking PrinterSetup Utility (or Print Center) and try printing again.In Mac OS X, restart the print job as follows.Select the printer icon in the Printers and Faxes(or Printers) window.Clear Pause Printing in the File menu to restart theprint job.Click Print & Fax. (This is identified as PrinterSetup Utility in some versions of Mac OS X.)Select the printer, and then Start Jobs in thePrinters menu to restart the print job.Wait until the system has been filled with ink. Thisprocess may take about seven and a half minutes.The printer is not on.In the Control Panel menu, PausePrint is On.The printer is not selected in theprinter driver. (The printer is inSleep mode.)The print job is paused. (Theprinter is in Sleep mode.)The printer was forced off duringoperation.Cause Corrective ActionThe display screen indicatesAgitatingPlease wait until ink agitation is finished.Ink agitation is in progress.(→"Pausing Printing," User Manual)You have selected Save in mailbox in Output Method on theprinter.Print the job saved on the printer's hard disk.Print jobs are pending. Manage the jobs on hold and print as needed.(→"Printing Saved Jobs," User Manual)(→"Managing Pending Jobs (Printing or Deleting Jobson Hold)," User Manual)The time for agitation varies depending on how longthe printer has been off. (Between about 30 secondsand two minutes.)