Canon 3303B002 User Manual

Canon 3303B002 User Manual Manual pdf 25 page image

24 Sending FaxesSending FaxesSending DocumentsBefore you send a document, see “Document Requirements” on page 20, and “Loading Documentsand Paper” on page 22. Direct Sending1 Load the document face up into the ADF.See “Loading Documents and Paper” on page 22.You can set the scanning resolution and contrast (see page 25).2 Dial the receiving party’s fax number.Use one of the dialing methods described in this chapter.3 Press [Start/Copy].The fax begins sending. Manual SendingIf you would like to first speak with the person you are sending the document to, use manualsending.1 Load the document face up into the ADF.See “Loading Documents and Paper” on page 22.You can set the scanning resolution and contrast (see page 25).2 Pick up the Handset or press [Hook] and dial the receiving party’s fax number.Use one of the dialing methods described in this chapter.Notez If paper jams, see “Troubleshooting” on page 60.z You can send up to 20 A4- and letter-size (10 legal-size) pages at a time (based on the Canon FAXStandard Chart No.1, standard resolution). You cannot add pages while the fax is sending.z The fax stores the document temporally in memory when sending a document, however, when memoryis full, it will send the document as it scans the document without storing document in memory.Notez If an error occurs during sending, the fax beeps intermittently for a few seconds and an errormessage appears on the LCD. If this happens, correct the problem and then press [Stop/Reset],then try sending the document again. See “LCD Messages” on page 73.z The fax automatically redials if the receiving party does not answer or if the line is busy. (Youcan specify the number of times it redials; see on page 46.)TEL= 3456xxxxTEL= 3456xxxx