23CopyingCopyingMaking CopiesOne of the convenient features of the fax is its ability to make high quality copies. You can make upto 99 copies of one document at a time.If you make copies of multiple documents at a time, the number of pages the fax can scan intomemory is as follows:1 Load the document face up into the ADF.See “Loading Documents and Paper” on page 22.2 Press [Start/Copy]. The LCD displays .3 Press [Receive Mode/Resolution].You can select , , or .4 Enter the number of copies (up to 99) using the numeric buttons, then press [Start/Copy].To make a correction to the number of copies, press [Clear] and re-enter the number.To stop copying anytime, press [Stop/Reset]. If the document does not eject, press [Start/Copy] for a few seconds, then the fax will feed out the document. See “Jams in the ADF” onpage 60.z // = 10 pagesNotez The number of pages the fax can scan into memory is not affected by the scanning resolutions (seepage 25).z and result in the same resolution when making copies.z If appears on the LCD when making multiple copies, see “Copying Problems” onpage 65.z If paper jams, see “Troubleshooting” on page 60.
