Menu
Can-Am 2007 Outlander 500 EFI Operator's Manual
                                                                                                                                                    | |
Contents
| 
ELECTRICAL WARNINGUnless otherwise indicated, al-ways turn ignition switch to theOFF position before performingany maintenance or repair on elec-trical system.Spark PlugRemovalRemove side panels.Unplug spark plug cables.Unscrew spark plugs one turn.Clean spark plugs and cylinder headswith pressurized air if possible. WARNINGAlways wear safety goggles whenusing pressurized air.Unscrew spark plugs completely thenremove them.vmo2006-007-029_aRH SIDE — REAR CYLINDER1. Spark plugvmo2006-007-030_aLH SIDE — FRONT CYLINDER1. Spark plugInstallationPrior to installation make sure that con-tact surfaces of cylinder heads andspark plugs are free of grime.Using a feeler gauge, set the sparkplug gap between 0.6 to 0.7 mm(0.024 to 0.027 in).Apply anti-seize lubricant over sparkplug threads to prevent a possibleseizure.Screw spark plugs into cylinder headsby hand and tighten with a torquewrench and a proper socket.Torque spark plugs to 20 N•m(15 lbf•ft).Battery WARNINGNever charge a battery while in-stalled in vehicle.RemovalDisconnect BLACK (-) cable first thenRED (+) cable. WARNINGAlways respect this order for dis-assembly; disconnect BLACK (-)cable first._____________________ 117 |
Related manuals for Can-Am 2007 Outlander 500 EFI
Can-Am 2009 Outlander 500 Operator's Manual
Can-Am Outlander 500 2008 Operator's Manual
Can-Am Outlander 400 EFI 2009 Operator's Manual
Can-Am outlander 400 Operator's Manual
Can-Am outlander 400 Operator's Manual
Can-Am outlander 400 series Operator's Manual
Can-Am OUTLANDER 6x6 2021 Series Operator's Manual
Can-Am Outlander X mr Series Operator's Manual
Can-Am 2008 Outlander 400 EFI Shop Manual
Can-Am MAX 400 EFI Operator's Manual
This manual is suitable for:
Product
Learn More
Legal
Copyright © 2024 OneStart. All Rights Reserved