Black plate (25,1)Cadillac CTS/CTS-V Owner Manual - 2013 - crc2 - 8/22/12Driving and Operating 9-25AutomaticTransmissionThe shift lever is on the centerconsole between the front seats.There are several different positionsfor the shift lever.P (Park): This position locks therear wheels. Use this position whenstarting the engine because thevehicle cannot move easily.{ WARNINGIt is dangerous to get out of thevehicle if the shift lever is not fullyin P (Park) with the parking brakefirmly set. The vehicle can roll.Do not leave the vehicle when theengine is running unless youhave to. If you have left theengine running, the vehicle canmove suddenly. You or otherscould be injured. To be sure thevehicle will not move, even whenyou are on fairly level ground,always set the parking brake andmove the shift lever to P (Park).See Shifting Into Park onpage 9‑22. If you are pulling atrailer, see Driving Characteristicsand Towing Tips on page 9‑51.Make sure the shift lever is fully inP (Park) before starting the engine.The vehicle has an electronic shiftlock release system. Fully apply theregular brakes first and then pressthe shift lever button before shiftingfrom P (Park) when the ignition keyis in ON/RUN. If you cannot shift outof P (Park), ease pressure on theshift lever and push the shift leverall the way into P (Park) as youmaintain brake application. Thenpress the shift lever button andmove the shift lever into anothergear. See Shifting out of Park onpage 9‑23.Notice: Shifting to R (Reverse)while the vehicle is movingforward could damage thetransmission. The repairs wouldnot be covered by the vehiclewarranty. Shift to R (Reverse) onlyafter the vehicle is stopped.R (Reverse): Use this gear toback up.At low vehicle speeds, R (Reverse)can be used to rock the vehicleback and forth to get out of snow,ice, or sand without damaging yourtransmission. See If the Vehicle IsStuck on page 9‑9 for additionalinformation.