Bosch Integrus Installation And Operation Manual

Also see for INTEGRUS: Operation manual Installation and operating manual Installation and operating manual Installation and user instructions Installation and operating manual

56 en | Configuration IntegrusIOM-INT | V1.1 | 2010.12 Installation and Operation manual Bosch Security Systems B.V.7.2.9 Configure auxiliary inputsThe way the signals on the auxiliary inputs (Aux-.L and Aux.-R) are handled can be set in theAux. Input Mode menu (4I).When the option 'Stereo' is chosen, the signals on both Aux. inputs are distributed as a stereosignal to all channels. This setting can for instance be used to transmit a music signal duringbreaks in a conference. Note that the Transmission mode must be set to 'Aux to All' (menuitem 4A) to actually transmit this stereo signal.The 'Stereo to Mono' and 'Mono+ Emergency' options can be selected when the transmitter isused in combination with an interpretation system. The Aux. input(s) will be distributed to theSymmetrical Audio Input and Interpreters Module. In this configuration the 'floor' signalshould be connected to the Aux. inputs.7.2.10 Set sensitivity of the inputsThe sensitivity of the audio and Aux. inputs can be set in the Input Sensitivity menus (4J, 4K,4L). The sensitivity can be set the same for all audio inputs (menu item 4L) or for each audioinput separately.Channel numbers:-00 ... 31 or -- Shows the channel numbers that are assignedto the selected carrier. The symbol ‘- -’ is usedwhen less than 4 channels are assigned.Menu Item Options DescriptionMenu Item Options Description4I Aux. Input Type:* - Stereo The Aux. inputs will be distributed in stereo toall channels when the transmission mode(menu item 1) is set to ‘Aux to All’.- Stereo to Mono The Aux-L and Aux-R inputs are combined intoa mono signal and distributed to theSymmetrical Audio Input andInterpretersModule (when present).- Mono + Emergency The Aux-L input is distributed to theSymmetrical Audio Input and InterpretersModule (when present). The Aux-R input isdistributed as emergency signal to allchannels when the emergency switchisclosed.Menu Item Options Value Description4J Level.Aux.L Level:-6 ... +6 dB Set the required sensitivity for the leftauxiliary input.4K Level.Aux.R Level:-6 ... +6 dB Set the required sensitivity for the rightauxiliary input.4J Level.Inputs Mode: Level: