Bosch Integrus Installation And Operation Manual

Also see for INTEGRUS: Operation manual Installation and operating manual Installation and operating manual Installation and user instructions Installation and operating manual

Integrus Configuration | en 45Bosch Security Systems B.V. Installation and Operation manual IOM-INT | V1.1 | 2010.122. Turn the button to move the cursor to the option value you want to change.3. Push the button to activate the option. The option value starts to blink.4. Turn the button to select a new option value.5. Push the button to confirm the new value. The option value stops blinking.6. Turn the button to move the cursor to another settable option (when available) andrepeat steps 3 to 5.To jump back from a sub-menu to an item of the main menu:1. Turn the button to move the cursor to the Main menu item number.2. Push the button. The item number and title starts blinking.3. Turn to select another item number.4. Push to confirm the selection.When you are turning counter-clockwise through submenu items, the display jumpsautomatically to the Main menu after you have reached the first item (A) of the sub-menu.Example:To jump back from an item of the main menu to the Transmitter status:1. Turn the button to the < Back screen.2. Push the button to go to the Transmitter Status.7.1.3 ExamplesEach step in the examples below shows the text on the display and the action to go to thenext step. Bold text in italics (text) indicates that the text is blinking. An underscore ( _ )indicates the position of the cursor. Each example starts at the Transmitter Status screen.Example 1: Disable carrier 2.See also section 7.2.7 .1. Turn the button to select the ‘Setup’ item (4) in the Mainmenu.2. Push and hold the button for 3 seconds to go to the ‘Setup’submenu.3. Turn to select the ‘C.Settings’ sub-menu item (4G).4. Push to go to the 'C.Settings' sub-menu.