Bosch Active Line Manual

Also see for Active Line: Original operating instructions Original instructions Original instructions Owner's manual Quick start guide

Contents

English–1Bosch eBike Systems 1 270 020 XBI | (11.4.16)Safety NotesRead all safety warnings and all instruc-tions. Failure to follow the warnings and in-structions may result in electric shock, fireand/or serious injury.Save all safety warnings and instructions for futurereference.The term “battery pack” used in these operating instructions,irrespective of model, refers both to standard battery packs(battery packs with holder on the bike frame) and to rack-typebattery packs (battery packs with holder in the rear rack/carrier).f Do not use the on-board computer as a handle. Liftingthe eBike up by the on-board computer can cause irrepara-ble damage to the on-board computer.f Make sure to not be distracted by the display of theon-board computer. If you do not focus exclusively onthe traffic, you risk being involved in an accident. If youwant to make entries in your on-board computer otherthan switching the assistance level, stop and enter theappropriate data.f Read and observe the safety warnings and instructionsin all operating instructions of the eBike system and inthe operating instructions of your eBike.Product Description andSpecificationsIntended UseThe Intuvia on-board computer is designed to control BoscheBike systems and display riding data.Product FeaturesThe numbering of the components shown refers to the illus-trations on the graphic pages at the beginning of the manual.Individual illustrations in these operating instructions may dif-fer slightly from the actual circumstances depending on theequipment of your eBike.1 Display-function button “i”2 Bike lights button3 On-board computer4 Holder for on-board computer5 On/Off button for on-board computer6 “RESET” button7 USB port8 Protective cap of USB port9 Operating unit10 Display-function button “i” on the operating unit11 Decrease assistance level/scroll down button “–”12 Increase assistance level/scroll up button “+”13 Push-assistance button “WALK”14 Lock latch for on-board computer15 Locking screw for on-board computerUSB charging cable (Micro A – Micro B)** not illustrated; available as accessoryDisplay elements of on-board computera Drive unit assistance indicatorb Assistance-level indicatorc Light indicatord Text indicatione Value indicationf Speed indicationg Shift recommendation: higher gearh Shift recommendation: lower geari Battery charge-control indicatorTechnical DataAssemblyInserting and removing the battery packFor inserting and removing the eBike battery pack in/from theeBike, please read and observe the battery pack operating in-structions.Inserting and removing the on-board computer(see figure A)To insert the on-board computer 3, slide it from the front intothe holder 4.To remove the on-board computer 3, press the lock latch 14and slide the on-board computer toward the front out of theholder 4.On-board computer IntuviaArticle number 1 270 020 906/909Max. charging current,USB connection mA 500Charging voltage,USB connection V 5USB charging cable 1) 1 270 016 360Operating temperature °C –5...+40Storage temperature °C –10...+50Charging temperature °C 0...+40Internal lithium-ion battery VmAh3.7240Protection type 2) IP 54 (dust and splashwater protected)Weight, approx. kg 0.151) Not included in standard scope of delivery2) When USB cover is closedBosch eBike system uses FreeRTOS (see www.freertos.org)