Bosch AUTODOME IP 4000i User Manual

Also see for AUTODOME IP 5000i: Configuration

AUTODOME IP 4000i/AUTODOME IP 5000i/AUTODOME IP 5000i IR General | en 15Bosch Security Systems User Manual 2018.05 | 1.1 |– user is the middle authorization level. At this level you can operate the device, play backrecordings, and also control camera, for example, but you cannot change theconfiguration.– live is the lowest authorization level. At this level you can only view the live video imageand switch between the different live image displays.To edit a passwordTo edit a password, click the pencil icon to the right of the column Type for the appropriateUser name.To create a new userTo create a new user, click Add.In the box User, fill in the fields. For Group, select the appropriate authorization level. ForType, select either Password (for a new password) or Certificate (for a certificate that thenew user is authorized to use).Note: Use a maximum of 19 characters. Do no use special characters.Confirm passwordIn each case, enter the new password a second time to eliminate typing mistakes.Notice!A new password is only saved when you click the Set button. You should therefore click theSet button immediately after entering and confirming a password.4.3 Date/TimeDate formatSelect your required date format.Device date/Device timeNotice!Ensure that recording is stopped before synching to the PC.If there are multiple devices operating in your system or network, it is important tosynchronize their internal clocks. For example, it is only possible to identify and correctlyevaluate simultaneous recordings when all units are operating on the same time.1. Enter the current date. Since the unit time is controlled by the internal clock, there is noneed to enter the day of the week – it is added automatically.2. Enter the current time or click the Sync to PC button to copy your computer's systemtime to the camera.Note: It is important that the date/time is correct for recording. An incorrect date/time settingcould prevent correct recording.Device time zoneSelect the time zone in which your system is located.Daylight saving timeThe internal clock can switch automatically between normal and daylight saving time (DST).The unit already contains the data for DST switch-overs for many years in advance. If the date,time and zone have been set up correctly, a DST table is automatically created.