Black & Decker SKU #BD-61 Manual

®®Setup• Remove shredder head from inside bin and place it on top of the bin. Using bothhands, push down firmly on shredder head to make sure it is locked in place.• Check shredder for any damage or defects. Some particles of paper may benoticed in or on the shredder which is normal due to product testing.• Plug power cord into a standard outlet.• Press the function switch to the Automatic position. The shredderis ready for use.• Place the alloted amount of paper into the shredder slot.• Always unplug before emptying the bin.MaintenanceALWAYS UNPLUG shredder before performing any maintenance. It is important to emptythe waste bin regularly to ensure the smooth operation of the cutting cylinders. Theshredder will not operate when the bin is full. Regular oiling is also necessary for properperformance. It is recommended to use shredder oil every few weeks.TroubleshootingIf you have a problem with your shredder, check the symptoms and remedies below.If you cannot solve the problem this way, contact Black & Decker paper shreddersCustomer Service. Do not open shredder head to attempt repair: It could exposeyou to electric shock and will void your warranty.Product InformationThis product is designed to shred paper, staples and credit cards. It is not intended toshred large paper clips, CD/DVDs, continuous forms, adhesive labels, transparencies,newspaper, cardboard or plastic aside from standard credit cards. Attempting to shredany of the above will cause damage to your shredder and will void all warranty.1auto/fwd/revfunction switch 2overheatindicatorlight- Oil cutting cylinders with shredder oil.Shredder squeaks, grinds orruns below capacity.- No action required.This is a self-cleaning function.Shredder continues to run for2 – 4 seconds after shreddinghas been completed.Symptom Remedy- Confirm the shredder head is positioned correctly.Make sure that shredder is properly plugged in andswitch is turned to ON position.Shredder does not start or stopswhile shredding.- Wait 30 minutes for shredder to cool down beforetrying again.Shredder overheat indicatorlight is on.- Check to see if bin is full.Shredder power is on butmachine will not shred.Paper jam. - Press the switch to the Reverse Mode and thenremove paper.SKU #BD-61Please read these instructions before use®SKU #BD-61SKU #BD-61SKU #BD-61®SKU #BD-61Limited WarrantyHoMedics warrants the cutting cylinders of the machine against defects ofworkmanship and material for a period of 3 years from the original purchasedate to the original consumer. HoMedics warrants all other parts of the machineagainst defects of workmanship and material for a period of 1 year from the originalpurchase date to the original consumer.Should there be a defect or malfunction of this product, HoMedics will replace theproduct free of charge. Customer is responsible for all shipping charges to return thedefective product to HoMedics. A copy of the proof of purchase showing originalpurchase date is required. This warranty is void if the product has been subject todamage, unreasonable use, improper service, or other causes not arising fromdefects in original material or workmanship. This warranty is void if factory seal isbroken or removed from the product. This warranty does not include adjustments,parts or repairs required by circumstances beyond the control of HoMedics.There are no expressed warranties other than those stated herein.Any expressed or implied warranties, including but not limited to merchantibility andfitness for a particular purpose are limited to the above warranty period. HoMedicsshall not be liable for any incidental or consequential cost, expenses or damagesresulting from any failure defect or malfunction of this product.Some states do not allow the exclusion of limitations of implied warranties orconsequintial damages, therefore, the above limitations may not apply to you.This warranty grants you specific legal rights, and you may also have otherrights that vary from state to state.Please contact us with any questions.3000 Pontiac TrailCommerce Township, MI48390Black & Decker and the Black & Decker logoare trademarks of The Black & Decker Corporationand are used under license. All rights reserved.NOFASTENERSNOAEROSOL CANSNOTA TOYNO LOOSECLOTHINGNO FINGERSOR HANDSNOHAIRThank you for buying a Black & Decker paper shredder. Black & Deckerpaper shredders have become the benchmark for innovation, performanceand quality to protect against identity theft. We have taken great care indesigning and engineering a product to meet and exceed your needs.To ensure years of safe, efficient performance, please readthese important product usage and safety instructions.If you have any questions regarding the product, please feel free tocall toll-free 1-800-297-5028.W A R N I N G ALWAYS KEEP OUT OF REACH OF CHILDRENWARNING ICONS:The icons on top of the shredder warn the user of the potential dangers if the shredderis used improperly.W A R N I N GWARNING: Hazardous moving parts. Keep fingers and other body parts away.WARNING: To reduce risk of fire, electrical shock or injury:NEVER allow children to operate a paper shredder, even under adult supervision.A paper shredder is NOT a toy.DO NOT use flammable synthetic oil, petroleum-based products or aerosols of any kindon or near product at any time.DO NOT operate any electrical product with a damaged cord.ALWAYS keep the power cord clear of the shredder opening.AVOID getting jewelry, hair or loose clothing too close to feed slot as serious injury can occur.DO NOT handle plug or product with wet hands.ALWAYS keep children and pets away from the shredder.ALWAYS unplug shredder when not in use.DO NOT attempt to feed more sheets of paper than specified on the feeder.DO NOT attempt to shred materials other than paper, credit cards and CD’s.DO NOT hold CD or DVD with finger through the center ring while feeding into shredder.ALWAYS empty the wastebasket prior to becoming full.DO NOT place shredder near heat or water source.DO NOT open shredder head to attempt repair: It could expose you to electric shock andwill void your warranty.The socket-outlet should be installed near the equipment and should be easily accessible.The Following are Important Safety Instructions.Read All Instructions Before Using.®Distributed byTHREE YEAR FOR1 2 34 5 6

/ 1

Related manuals for Black & Decker BD-61