HandscannersBCS 3600ex series 4 Product descriptionSubject to technical modifications17/05/18 33 / 724.6.2 Setting the DIP switchesThe DIP switches (X18) must be set as follows depending on the interface usedFig. 12: DIP switches and switch positionsSettingInterface S1 S2 S3 S4RS 232 0 0 0 0RS 422 0 1 1 0RS 485 0 0 1 0USB 1 1 1 0Tab. 18: Setting4.6.3 Ranges / maximum cable length of connected cable from the universal supply module to the host or PCInterface RangeRS 232 20 m / 66 ft 66 ft.RS 422 1000 m / 3280 ft 3280 ft.RS 485 1200 m / 3937 ft 3937 ft.USB 5 m / 16 ft 16 ft.Tab. 19: Ranges / maximum cable length of connected cable4.6.4 Permissible core cross-sectionsDescription of the conductor Permissible core cross-sectionRigid 0.08 mm 2 - 2.5 mm2 28 – 14 AWGFlexible 0.08 mm 2 - 2.5 mm2 28 – 14 AWGFlexible with wire end ferrule, without plasticsleeve0.25 mm 2 - 1.5 mm2 24 – 16 AWGFlexible with wire end ferrule, with plastic sleeve 0.25 mm 2 - 1.5 mm2 24 – 16 AWGWire diameter (AWG) 28 - 12 kcmil 36 – 39 AWGTab. 20: Permissible core cross sections
