Handheld scanner series BCS 3600 exQuick Start Guide

intended use

Bartec BCS 3608ex-NI Quick Start Manual

About this documentation

Explanation of Symbols

Symbols and means of presentation

Reference documents

Safety

Personnel qualifications

Residual risks

Damage to eyes caused by laser light

Approval, standards

Product description

Possible system configurations

Construction of wired hand-held scanners

Contacts / cables

Construction of the Bluetooth hand-held scanner

External contacts

Construction of cradle

Construction of 4-slot charging station for spare batteries

Meaning of LED display / beeps

Construction of the universal supply module

Terminal assignment

Setting the DIP switches

Permissible connection cable cross sections

Product marking

Decodable barcode types

Transport and storage

Configuration

Required programming cables

Programming for software developers

Pairing between Bluetooth hand-held scanner and cradle

Pairing between Bluetooth hand-held scanner and universal supply module

Thresholds for battery charge on Bluetooth hand-held scanners

Connection / commissioning (qualified personnel)

Universal supply module

Connecting the universal supply module to an HID device

Connecting the cradle to the host PC and power source

Connecting to the HMI: connecting the hand-held scanner to the HMI

Operation

Placing the hand-held scanner in the cradle

Connecting the Bluetooth hand-held scanner to the cradle

Charging the battery

Inspection to be conducted prior to use

Scanning

Optimal scan position

Cleaning

Maintenance, inspection, repair

Faults – causes and remedies

Restoring the connection between Bluetooth hand-held scanner and cradle

Removing customised default settings (resetting to factory settings)

Disposal

Scope of delivery

Ambient conditions

Annex

Notice

BCS 3608ex-IS

Corded hand-held scanner BCS

Bluetooth hand-held scanners BCS

Corded hand-held scanners BCS

Construction of base station (cradle)

Setting the DIP switches (only for Zone 2/22 and Div 2)

Permissible core cross-sections

Recommendation for data line

Product marking hand-held scanner

Product marking universal supply module

Functions

Unpairing the Bluetooth hand-held scanner

Prefix and Suffix

Advanced Data Formatting (ADF)

Radio Communication General

Pairing between Bluetooth hand-held scanner and base station (cradle)

Pairing between Bluetooth hand-held scanner and universal power supply module

Pairing between Bluetooth hand-held scanner and Bluetooth enabled device

Creating Pairing Barcodes with Zebra 123 Scan Utility

Programming the interface parameters

Connecting the USM to an HID device

Connecting the base station to the host PC and power source

Wiring diagram for Universal Supply Module (USM)

USM with RS232 Interface

USM with RS422 Interface

USM with RS485 Interface

Explanation of the interfaces

Testing the communication (RS232 or USB-SPP)

Placing the hand-held scanner in the base station

Connecting the Bluetooth hand-held scanner to the base station

Restoring the connection between Bluetooth hand-held scanner and base station

Set Factory Default - Remove Custom Defaults (Reset to Factory Defaults)

Notes on resetting the hand-held scanners

Base station does not work

BCS 3608ex-NI

BCS 3678ex-IS

BCS 3678ex-NI

Bartec BCS 3608ex-NI Quick Start Manual

Product

Learn More

Legal


Contents intended use	Handheld scanner series BCS 3600 exQuick Start Guide Next / 30