Barco XDL-4K75 User Manual

Also see for XDL-4K30: Installation manual User manual

Barco XDL-4K75 User Manual Manual pdf 62 page image

8. GUI – InstallationImage 8-82. In the Warp menu, click Warp to toggle between On and Off.Image 8-9 Image 8-108.4.3 Warping – Screen SizeAbout (Warp) Screen Size adjustmentIf the used source aspect ratio is different than the projector aspect ratio, e.g. source is 16:9 and projector is 16:10, then black barswill be projected. In the example case a black bar on top and bottom of the image will be projected. The warp area contains notonly the image information but also the black bars. If we want to position e.g. the active left top corner exactly on the screen using4 corner warp, then it is very hard to do that as we are moving the black left top corner and we do not have control over the exactposition of image left top corner. By moving the outline of the warp screen size to the active image information, the corner points ofthe warp area are now exactly on the corner points of the active image information and makes warping much easier.Image 8-11Warp outline exampleHow to adjust the image?1. In the main menu, select Installation → Warp → Screen Size.58 R5906151 XDL 17/04/2018