Barco XDL-4K75 User Manual

Also see for XDL-4K30: Installation manual User manual

Barco XDL-4K75 User Manual Manual pdf 48 page image

6. GUI – SourceType of layout Description Available connectors Mode1 2: Dual 1 x 2Two inputs are required. Thesources are displayed next to eachother.Quad DP 1.2 Input:• 2x DisplayPortMono / Active stereo1 23 4: Quad 2 x 2Four inputs are required. Thesources are displayed in fourquadrants.Quad Combo input:• 4x SDI inputQuad DP 1.2 Input:• 4x DisplayPortMono / Active stereo1 2 3 4: Quad 1 x 4Four inputs are required. Thesources are displayed next to eachother.Quad DP 1.2 Input:• 4x DisplayPortMono / Active stereo1: 2 x singleTwo inputs are required. Thesources are displayed one abovethe other.Quad DP 1.2 Input:• 2 x DisplayPortPassive stereo1 2: 2 x Dual 1 x 2Four inputs are required. Twosources are displayed next toeach other, while the other two aredisplayed above the first twoQuad DP 1.2 Input:• 4x DisplayPortPassive stereoEven if passive stereo sources are selected, the output of this projector can only be in either 2D or in ActiveStereo. Advanced image processing will make sure a passive stereo image is properly converted to activestereo.How to select a stitched layout1. Press Menu to activate the menus and select Source.Image 6-2Select Source2. Press OK.The Select Source menu is displayed with the actual available sources filled out, including all available stitched layout options.44 R5906151 XDL 17/04/2018