Barco XDL-4K75 User Manual

Also see for XDL-4K30: Installation manual User manual

Barco XDL-4K75 User Manual Manual pdf 41 page image

4. Getting Started4. Start Projector Toolset and make a connection with the projector. For more information, see the Projector Toolset user guide.5. Select tab Update settings.6. Fill out the path to the update file (1)Image 4-10Update Pulse projectorOr,click on the path selection icon (2) to open a browser window.7. Browse to the desired update package (format .fw) and click Select Update Package.The path will be filled out in the input field next to Update File.8. Click Update (3).The update starts. This action can take a long time. A message is displayed.9. Click Yes to continue (4).The update file will be transferred to the projector and installed. The projector will reboot.A message is displayed. Click Ok to clear the message.How to update the software if the projector isn’t connected to the network1. Power on the projector. Wait until the Power on/off button is either lit white or blue.2. Download the latest firmware file ( format .fw) from Barco’s website. The firmware can be downloaded for free from Barco’s web-site, (URL: http://www.barco.com). Click on myBarco and log in to get access to secured information. Registration is necessary.If you are not yet registered, click on New to myBarco and follow the instructions. With the created login and password, it ispossible to log in where you can download the software.3. Place the firmware file on a clean USB flash drive.Note: Make sure the flash drive is FAT32 compatible & no other files are on the flash drive.4. Plug the flash drive in the USB port on the Communication Panel.The update file will be transferred to the projector and installed. The projector will reboot when completed.R5906151 XDL 17/04/2018 37