Barco S3 User Manual

Also see for EC-200: Safety guide Safety guide Quick start guide User guide

Contents

Barco S3 User Manual Manual pdf 396 page image

13. E2 Maintenance13.25 USB Extension CableImage 13-63The USB Extension cable connects the USB cable to the System Power board. This procedure provides in-structions on how to disconnect the cable on both sides.Concerned partsR767269K Cable Kit SetNecessary tools1 x Phillips Screwdriver #2How to remove the USB Extension cable1. Partially remove the front panel assembly and pull it away to expose the cables behind it (refer to the related procedure).2. Disconnect the USB Extension cable from the USB cable.3. Gently push the cable through the grommet located in the 1RU tray.Image 13-644. Turn the unit upside down and remove the bottom panel (Follow the instructions provided in the bottom panel removal section).5. Locate the USB Extension cable that is plugged on the System-Power board.Image 13-656. Unplug the USB Extension cable by gently pushing it out.7. Pull the cable out of the unit.392 R5905948 EVENT MASTER DEVICES 17/07/2017