6. EM GUI orientation6.11 Configuration Menu > Adjustment areaGeneralSituated on the right hand side of the screen is the Adjustment area. In this area the user can define and adjust unit specific param-eters, inputs, backgrounds, outputs, multiviewer outputs and destination affected to the selected system.DescriptionThere are 4 tabs in this area:• Input: this tab provides a list of all the created inputs. Herethe user can create new entries by associating them withinput connectors. It is also in this tab that the user candelete unused or obsolete inputs.• Background: provides a list of backgrounds of the selectedsystem. Similarly to inputs, the user can add and removeBackgrounds from the system.• Output/MVR: the user can add or remove program,auxiliary and multiviewer outputs in this list.• Destination: a destination is a location where the user canroute the output of Event Master series processor (screens,widescreens, monitors etc.). The user could assign theoutputs that are created in the previous tab to destinations,and deleted unused or obsolete destinationsAlways on top:• Adjustment: in this tab the user performs adjustmentsavailable for the selected item (device, input, background,output, destination). The content of this tab variesdepending on the selected item. Access to this area isachieved from the System diagram area (click on deviceor on a destination) or in one of the tabs of the Adjustmentarea (input, background, output, destination) .The following sections describe how to perform the configuration of each part of the system in detail:• "Configuration Menu > Adjustment > Unit Configuration", page 105• "Configuration Menu > Adjustment > Input Configuration", page 107• "Configuration Menu > Adjustment > Background Configuration", page 116• "Configuration Menu > Adjustment > Output Configuration", page 118• "Configuration Menu > Adjustment > Destination Configuration", page 126104 R5905948 EVENT MASTER DEVICES 17/07/2017
