Internet Security Router User’s Manual Chapter 9. Configuring Firewall/NAT Settings71Figure 9.21. FTP Filter Example – Associate FTP Filter Rule to an ACL Rule11. Associate the newly added FTP application filter rule to a firewall ACL rule (inbound, outbound orgroup ACL) by selecting a FTP filter from the FTP filter drop-down list (see Figure 9.21) and thenclick on or button to save the settings.9.7.1.3.2 HTTP Example: Add a HTTP Filter Rule to Block JAVA Applets and Java Archives1. Open the Application Filer Rule Configuration page (Firewall è Policy List è Application Filter)Figure 9.22. HTTP Filter Example – Configuring HTTP Filter Rule2. Select HTTP from the Filter Type drop-down list.3. Select “Add New Filter” from the Filter Rule drop-down list.4. Enter a name for this rule – in this example, HTTPrule1.5. Change the port number if necessary. However, it is recommended that you keep the “Default”setting.6. Choose to enable to disable the logging option. The default setting is to keep the logging for thisrule disabled.FTP filter drop-down listFilter Type drop-down listFilter Rule drop-down list
