Internet Security Router User’s Manual Chapter 3. Quick Start Guide17Figure 3.7. Setup Wizard – LAN IP Configuration PageFigure 3.8. Setup Wizard – DHCP Server Configuration Page8. It is recommended that you keep the default settings for DHCP server until after you havecompleted the rest of the configurations and confirm that your Internet connection is working.Click on the button to proceed to the next configuration page.9. Now we are at the last page of the Setup Wizard, which is to configure the WAN settings for theInternet Security Router. Depending on the connection mode required for your ISP, you canselect from the following three connection modes from the Connection Mode drop-down list (seeFigure 3.9): PPPoE, Dynamic and Static.
