Chapter 11. Configuring Remote Access Internet Security Router User’s Manual1123. Click on the button to delete this user group. Note that a user group cannot be deletedunless all the users belong to the group are deleted first.To delete a user, simply click on the icon of the user in the Remote User List table in the User GroupConfiguration page or follow the instruction below:1. Open the User Group Configuration page (see section 11.2.2 Access User Group ConfigurationPage – (Remote Access è User Group)).2. Click on the icon of the user to be deleted in the Remote User List table or select the userfrom the User drop-down list.3. Click on the button to delete this user.11.2.6 User Group and Users Configuration ExampleFigure 11.2. User Group and Users Configuration ExampleExampleFigure 11.2 displays the screen with entries to:„ Add a new user group and a new user• Group “Sales”• User “Alan”11.3 Configure Group ACL RulesGroup ACL is used to control access privileges for remote or local user groups. Its configuration is similar tothat for firewall inbound/outbound ACL rules, except two additional fields – rule type and group name (seeFigure 11.3). For procedures to configure group ACL rules, please refer to section 9.3 or 9.4 for details.11.3.1 Group ACL Specific Configuration ParametersTable 11.2 describes the group ACL specific configuration parameters. The rest of the configurationparameters are the same as those for firewall inbound/outbound ACL rules. Please refer to Table 9.1 andTable 9.2 for details on common configuration parameters.Table 11.2. Group ACL Specific Configuration ParametersField DescriptionTypeSelect the type of traffic to which this rule should apply.Inbound Select this if this rule is for inbound traffic.
