Chapter 5. Configuring LAN Settings Internet Security Router User’s Manual302. Configure the LAN PCs to use the IP addresses assigned by the DHCP server on the InternetSecurity Router, or enter the Internet Security Router's LAN IP address as their DNS serveraddress manually for each PC on your LAN.NoteDNS addresses that are assigned to LAN PCs prior to enablingDNS relay will remain in effect until the PC is rebooted. DNS relaywill only take effect when a PC's DNS address is the LAN IPaddress.Similarly, if after enabling DNS relay, you specify a DNS address(other than the LAN IP address) in a DHCP pool or statically on aPC, then that address will be used instead of the DNS relayaddress.5.4 Viewing LAN StatisticsYou can view statistics of your LAN traffic on the Internet Security Router. You will not typically need to viewthis data, but you may find it helpful when working with your ISP to diagnose network and Internet datatransmission problems.To view LAN IP statistics, click Statistics on the LAN submenu. Figure 5.3 shows the LAN Statistics page:Figure 5.3. LAN Statistics PageTo display the updated statistics since you opened the page, click .
