Afag CR 25 Assembly & Operating Instructions

Contents

Afag CR 25 Assembly & Operating Instructions Manual pdf 6 page image

General6 – 56 Assembly instructions EN  CR 25 / CR 32  Edition 01/2020  Rev. 4.01 General1.1 Contents and purpose of these assembly instructionsThese assembly instructions contain important information on assembly,commissioning, functioning and maintenance of the rotary modules CR 25,CR 32 to ensure safe and efficient handling and operation.Consistent compliance with these assembly instructions will ensure: permanent operational reliability of the rotary module, optimal functioning of the rotary module, timely detection and elimination of defects (thereby reducing maintenanceand repair costs), prolongation of the rotary module service life.The illustrations in this manual shall provide you with a basic understanding ofthe module and may vary from the actual design of your module.1.2 Explanation of symbolsThe safety notes are marked by a pictogram and a signal word. The safety notesdescribe the extent of the hazard.DANGERDanger!This safety note indicates an imminently hazardous situation which, if notavoided, will result in death or serious injury.WARNINGWarning!This safety note points out a potentially hazardous situation which, if notavoided, could result in death or serious injury.CAUTIONCaution!This safety note points out a potentially dangerous situation which, if notavoided, can result in minor or slight injuries.NOTICEThis safety note points out a potentially dangerous situation which, if notavoided, can cause substantial damage to property and the environment.