Afag CR 25 Assembly & Operating Instructions

Contents

Afag CR 25 Assembly & Operating Instructions Manual pdf 12 page image

Safety instructions12 – 56 Assembly instructions EN  CR 25 / CR 32  Edition 01/2020  Rev. 4.02.4.3 Obligations of the personnelAll personnel working with the rotary modules are required to: read and observe these assembly instructions, especially the chapter onsafety, observe the occupational safety and accident prevention regulations, observe all safety and warning signs on the rotary modules, refrain from any activity that might compromise safety and health.In addition, the personnel must wear the personal protective equipmentrequired for carrying out their work. (Chapter 2.6).2.5 Personnel requirements2.5.1 Personnel qualificationThe activities described in the assembly instructions require specific requisitesat the level of professional qualifications of the personnel.Personnel not having the required qualification will not be able to asses the risksthat may arise from the use of the rotary modules thus exposing himself andothers to the risk of serious injury. Therefore, only qualified personnel may bepermitted to carry out the described activities on the rotary modules.Persons whose ability to react is restricted due to the intake of medication or thelike must not interact with the rotary modules.These installation instructions are intended for skilled personnel (installers,system integrators, maintenance personnel, technicians), electricians andoperating personnel.The following is a description of the professional skills (qualifications) requiredfor carrying out the different activities:Qualified personnel:Qualified personnel with appropriate training who are qualified due to theirspecial know-how and fully familiar with the machine and who have been giveninstructions on how to carry out the task entrusted to them safely.Qualified electrician:Persons who have obtained their electrical qualifications through appropriateprofessional training and complementary courses that enables them to identifyrisks and prevent possible hazards resulting from electricity.Operator (trained personnel):Authorized persons who due to their specialized professional training,expertise and experience are capable of identifying risks and preventingpossible hazards arising from the use of the machine.