Advantech EKI-6311GN User Manual

Advantech EKI-6311GN User Manual Manual pdf 35 page image

EKI-6311GN-User_Manual V2.1 Page 29Extension Channel Protection ModeThis is to avoid conflict with other wireless network and boost the ability of your device to catchall 802.11g transmissions. However, it may decrease wireless network performance. Comparedto CTS-Self; the transmission amount of CTS-RTS is much lower.Enable MAC CloneAvailable only under wireless client mode, it hides the MAC address of the AP while displays theone of associated wireless client or the MAC address designated manually.3.8 Site SurveyUnder wireless client mode, the EKI-6311GN is able to perform site survey, through which,information on the available access points will be detected.Open “Basic Settings” in “Wireless”, by clicking the “Site Survey” button beside “WirelessMode” option, the wireless site survey window will pop up with a list of available AP in thevicinity. Select the AP you would like to connect and click “Selected” to establish connection.Figure 26 Site SurveyVAP Profile SettingsAvailable in AP mode, the IEEE 802.11b/g/n Wireless Outdoor CPE allows up to 16 virtual SSIDs ona single BSSID and to configure different profile settings such as security and VLAN ID to each SSID. Tocreate a virtual AP, you may check the Enable box of the profile and click on the profile (eg. Profile 2)to configure wireless and security settings. Hit Apply to active the profile.