Advantech EKI-6311GN User Manual

Advantech EKI-6311GN User Manual Manual pdf 23 page image

EKI-6311GN-User_Manual V2.1 Page 17Chapter 3 Basic Settings3.1 Factory Default SettingsWe’ll elaborate the EKI-6311GN factory default settings. You can re-acquire these parameters bydefault. If necessary, please refer to the “Restore Factory Default Settings”.Table 1 EKI-6311GN Factory Default SettingsFeatures Factory Default SettingsUsername adminPassword passwordWireless Device Name apXXXXXX (X represents the last 6digits of Ethernet MAC address)Operating Mode APData Rate AutoLANIP Address 192.168.1.1Subnet Mask 255.255.255.0Gateway 0.0.0.0Primary DNS Server 0.0.0.0Secondary DNS Server 0.0.0.0Spanning Tree Enable802.11 Mode 802.11b/g/nChannel Number 6SSID WirelessBroadcast SSID EnableHT Protect DisableData Rate AutoOutput Power FullChannel Mode 20MHzWMM EnabledRTS Threshold (byte) 2346Fragmentation Length (byte) 2346Beacon Interval 100DTIM Interval 1Space in Meter 0Flow Control by AP DisableSecurity Open SystemEncryption NoneWireless Separation DisableAccess Control DisableSNMPEnable/Disable EnableRead Community Name PublicWrite Community Name PrivateIP Address 0.0.0.03.2 System RequirementsBefore configuration, please make sure your system meets the following requirements:A computer coupled with 10/ 100 Base-TX adapter;