Advanced LAN Bypass User Manual604.29 ./lbpcu -GBLGets the ON duty cycle and blinking period settings for LED indication in response toa BYPASS action on a specified segment (cf. Section 3.7.10.2).ExampleFigure 4.45 Get the LED ON/OFF Settings for a BYPASS Action on Segment 14.30 ./lbpcu -SDLSets the ON duty cycle and blinking period for LED indication in response to a DIS-CONNECT action on a specified segment (cf. Section 3.7.10.3).Example‘Figure 4.46 Set the LED ON/OFF Settings for a DISCONNECT Action onSegment 1root@localhost:~#./lbpcu-GBLExample:Thedutyandperiodare50(%)and500msforbypassledindicationonsegment_1.Souse-GBL1willgetvalueofduty andperiod.Command:Get dutyand period forbypassled indication.Syntax:GBLOutput:duty andperiodfor bypassledindication.Error:LBP_ERR_PARAM_OUT_OF_BOUND(0x93)root@localhost:~#./lbpcu-GBL1Duty ofbypassled:30%Periodofbypassled: 1.0secroot@localhost:~#./lbpcu-SDLExample:Setsegment150(%)dutycycleof500msperiodfordisconnectledindication.Souse-SDL1505willset50(%)fordutycycleand500msfor period.Command:Set dutyand period fordisconnect ledindication.Syntax:SDLOutput:N/ANOTE: This setting will apply to both segments on the same NMCcardError:LBP_ERR_PARAM_OUT_OF_BOUND(0x93)root@localhost:~#./lbpcu-SDL130 10
