3. Press and release the MEMObutton on the control panel. Youwill hear a beep. Immediatelypress and hold one of the memorybuttons (1 or 2) until you hear twobeeps. The indicator in thememory button will come on. Thecurrent positions of the driver'sseat, steering wheel, and outsidemirrors are now stored.Doing any of the following afterpressing the MEMO button willcancel the storing procedure.● Not pressing a memory buttonwithin 5 seconds.● Readjusting the seat position.● Readjusting the outside mirrorposition.Each memory button stores only onedriving position. Storing a newposition erases the previous settingstored in that button's memory. Ifyou want to add a new position whileretaining the current one, use theother memory button.Selecting a Memorized PositionTo select a memorized position, dothis:1. Make sure the vehicle is parked.2. Press the desired memory button(1 or 2) until you hear a beep, thenrelease the button.The system will move the seat,steering wheel, and outside mirrorsto the memorized positions. Theindicator in the selected memorybutton will flash during movement.When the adjustments are complete,you will hear two beeps, and theindicator will remain on.To change the ‘‘MEMORYPOSITION LINK’’ setting, see page108.MEMO BUTTONMEMORY BUTTONSCONTINUEDDriving Position Memory System169Instruments and Controls11/08/29 10:08:20 12 ACURA MDX MMC North America Owner's M 50 31STX650 enu
