Do not attempt to alter this systemor add other devices to it. Electricalproblems could result that may makeyour vehicle undrivable.If you have lost your key and youcannot start the engine, contact yourdealer.If the system repeatedly does notrecognize the coding of your key,contact your dealer.When you turn the ignition switch tothe ON (II) position, the immobilizersystem indicator should come onbriefly, then go off. If the indicatorstarts to blink, it means the systemdoes not recognize the coding of thekey. Turn the ignition switch to theLOCK (0) position, remove the key,reinsert it, and turn the ignitionswitch to the ON (II) position again.The system may not recognize yourkey’s coding if another immobilizerkey or other metal object (i.e. keyfob) is near the ignition switch whenyou insert the key.The immobilizer system protectsyour vehicle from theft. If animproperly-coded key (or otherdevice) is used, the engine’s fuelsystem is disabled.As required by the FCC:This device complies with Part 15 of theFCC rules. Operation is subject to thefollowing two conditions: (1) This devicemay not cause harmful interference, and(2) this device must accept anyinterference received, includinginterference that may cause undesiredoperation.Changes or modifications not expresslyapproved by the party responsible forcompliance could void the user’sauthority to operate the equipment.This device complies with IndustryCanada Standard RSS-210.Operation is subject to the following twoconditions: (1) this device may not causeinterference, and (2) this device mustaccept any interference that may causeundesired operation of the device.Immobilizer System94Always take the ignition key with youwhenever you leave the vehicle alone.2008 TL
