Menu
Acquisitions BLOOMSBURY Installation, User And Service Manual
Also see for BLOOMSBURY: Installation & user's instructions
                            | |
Page 11 AB-G200L-REM-I01-150914has to clear out any air locks, also if it is an LPG burner and has been stood unusedfor time, the gas could have settled in the pipework and again this could takelonger.POSITIONING THE LOGSThe logs should only be arranged as detailed below and by a qualified person.The stove must only be fitted with the ceramics supplied. DO NOT use ant extra logs orcoals.1. Slacken the screw securing the door handle and open the stove door.2. Position the back board into the burner tray ensuring that is correctly seatedbehind Tab A and that the flame strip is not obstructed (Fig 5).3. Locate LOG1DMR and LOG2DMR into position on the back board as shown (Fig 6).4. Locate LOG3DMR into position as shown (Fig 7)5. Locate LOG4DMR into position as shown (Fig 7)6. Close the stove door.7. Tighten the door locking screw.Fig.5Tab AFig.6 Fig.7LOG2DMR LOG1DMR LOG4DMR LOG3DMR |
Related manuals for Acquisitions BLOOMSBURY
This manual is suitable for:
Product
Learn More
Legal
Copyright © 2024 OneStart. All Rights Reserved