62 PRODUCT USER GUIDEFigure 61 Virtual Drive SelectionNavigation ButtonsConnect/DisconnectTo establish the drive redirection press the Connect button once. If all thesettings are correct, the status bar displays that the connection has beenestablished, the Connect button is disabled and the Disconnect button isenabled.On an error, the status line shows the error message. The drive redirectionsoftware tries to lock the local drive before it is redirected. That means that ittries to prevent the local operating system from accessing the drive as longas it is redirected. This may also fail, especially if a file on the drive iscurrently open. In the case of a locking failure, you will be prompted if youwant to establish the connection anyhow. This should not be a seriousproblem when the note above is respected. If the write support is enabled, adrive which is not locked might be damaged by the Drive Redirection.With the Disconnect button, a connection via Drive Redirection connection isstopped.Exit/HideIf the Exit button is pressed, the Drive Redirection software is closed. If aDrive Redirection connection is active, the connection will be closed beforethe application terminates.Using the Hide to Tray button the application is hidden, but not terminatedcompletely. That means that an active connection will be kept active until it isclosed explicitly. You can access the software by its tray icon. The tray iconalso shows whether a connection is established or not. A double click on theicon shows the application window, or with a right click you may access asmall menu (see Figure 62).Figure 62 Tray InfoOptionsFigure 63 USB Mass Storage Option
