Configuring the Switch3-543CLI – Use the snmp-server view command to configure a new view. This exampleview includes the MIB-2 interfaces table, and the wildcard mask selects all indexentries.User AuthenticationYou can restrict management access to this switch using the following options:• User Accounts – Manually configure access rights on the switch for specified users.• Authentication Settings – Use remote authentication to configure access rights.• HTTPS Settings – Provide a secure web connection.• SSH Settings – Provide a secure shell (for secure Telnet access).• Port Security – Configure secure addresses for individual ports.• 802.1X – Use IEEE 802.1X port authentication to control access to specific ports.• IP Filter – Filters management access to the web, SNMP or Telnet interface.Configuring User AccountsThe guest only has read access for most configuration parameters. However, theadministrator has write access for all parameters governing the onboard agent. Youshould therefore assign a new administrator password as soon as possible, andstore it in a safe place.The default guest name is “guest” with the password “guest.” The defaultadministrator name is “admin” with the password “admin.”Command Attributes• Account List – Displays the current list of user accounts and associated accesslevels. (Defaults: admin, and guest)Console(config)#snmp-server view ifEntry.a 1.3.6.1.2.1.2.2.1.1.*included 4-125Console(config)#exitConsole#show snmp view 4-126View Name: ifEntry.aSubtree OID: 1.3.6.1.2.1.2.2.1.1.*View Type: includedStorage Type: nonvolatileRow Status: activeView Name: readaccessSubtree OID: 1.3.6.1.2View Type: includedStorage Type: nonvolatileRow Status: activeView Name: defaultviewSubtree OID: 1View Type: includedStorage Type: nonvolatileRow Status: activeConsole#
