Configuring the Switch3-43Main MenuUsing the onboard web agent, you can define system parameters, manage andcontrol the switch, and all its ports, or monitor network conditions. The followingtable briefly describes the selections available from this program.Table 3-2 Main MenuMenu Description PageSystem 3-10System Information Provides basic system description, including contact information 3-10Switch Information Shows the number of ports, hardware/firmware versionnumbers, and power status3-11Bridge Extension Shows the bridge extension parameters 3-13IP Configuration Sets the IP address for management access 3-14File 3-19Copy Allows the transfer and copying files 3-19Delete Allows deletion of files from the flash memory 3-20Set Startup Sets the startup file 3-20Line 3-24Console Sets console port connection parameters 3-24Telnet Sets Telnet connection parameters. 3-26Log 3-28Logs Stores and displays error messages 3-28System Logs Sends error messages to a logging process 3-28Remote Logs Configures the logging of messages to a remote logging process 3-30SMTP Logs Sends an SMTP client message to a participating server 3-32Reset Restarts the switch 3-34SNTP 3-35Configuration Configures SNTP client settings, including broadcast mode or aspecified list of servers3-35Clock Time Zone Sets the local time zone for the system clock 3-38SNMP 3-38Configuration Configures community strings and related trap functions 3-40Security 3-54User Accounts Assigns a new password for the current user 3-54Authentication Settings Configures authentication sequence, RADIUS and TACACS 3-56HTTPS Settings Configures secure HTTP settings 3-59
